Faculty Publications

Faculty Publications

 

 

 

 

Amit Kumar

Sr. No.

Description

1

“Design and implementation of hydraulic press system using MATLAB”, in the International Journal of Engineering Sciences and Research Technology (IJESRT), Vol. 7(8), pp.  13-17, 2018, ISSN: 2277-9655.DOI: 10.5281/zenodo.1336656.

2

“An Experimental Study of Heating and Mass Transfer for Sensible Heating of Sugarcane Juice”, Proceedings of 6th International Conference on Fluid Mechanics and Fluid Power(FMFP-2016), Dec. 15-17, 2016 MNIT Allahabad, Uttar Pradesh, ISBN 978-93-5267-408-4, Paper Id-261, pp. 108 

3

“Thermal Performance of Copper and Brass Immersion Rods for the Evaporation of Sugarcane Juice”, S-JPSET : ISSN : 2229-7111, Vol.4, Issue1, 2013, pp. 9-14.

4

“An Overview of Optimization Techniques Used in Solar Drying”, (AJSAT) Vol1. No.12013, pp. 5-11.

5

Evaluation of Convective Heat Transfer Coefficient for Sensible Heating of Sugarcane Juice by Copper Immersion Rod, Proceedings of National Conference NEIET-2012, April 28, 2012, BITS, Bhiwani (Haryana).

6

Thermal Performance of Copper and Brass Immersion Rods for the Evaporation of Sugarcane Juice, S-JPSET : ISSN : 2229-7111,2012,  Vol. 4, Issue 1

7

An overview of optimization techniques used in solar drying, Asian Journal of Science and Applied Technology (AJSAT) Vol1.No.1 2013 pp 5-11.

8

An overview of heating process used in Jaggery making, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.76-81, BRCM CET, Bahal (Haryana).

9

Effect and Comparison of Open Sun and Indoor Forced Convection on Heat Transfer Coefficients for Drying of Vermicelli, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.136-144, BRCM CET, Bahal (Haryana).

10

Career prospects for Mechanical engineers, Technical journal of Mechanical Engineering Society (MES), June, 2013, p. 5,  BRCM CET, Bahal (Haryana)

Dr. B.C. Sharma

Sr. No.

Description

1

Steels for Erosion Resistant Applications, Students conference on Engineering and system, SCES-2014, May 28 -30, 2014, MNNIT, Allahabad.

2

CFD analysis of natural gas based carburetor for a two stroke spark ignition engine, Proc.       International Conference on “Recent Trends in Mechanical Engineering” ICRTME-2013, ITM Gurgaon, 16th Nov., 2013.

3

Optimization of Tribological Parameters in Al6061/SiC Metal Matrix Composite by Taguchi’s Technique, International Journal of Innovative Technology And Creative Engineering (ISSN: 2045-8711) VOL.2 NO.11 November 2012.

Dr. D. B. Goel

Sr. No.

Description

 

 

1

Steels for Erosion Resistant Applications, Students conference on Engineering and system, SCES-2014, May 28 -30, 2014, MNNIT, Allahabad.

2

Man and Metal, Mechanica , BRCM CET, June 2014

3

Erosive behavior of Fe-alloys for under water components of hydroelectric power plants, Trans. Ind. Inst. Met. 66(4), 2013, 425-428

4

Effect of Carbides on Erosion Resistance of 23-8-N Steel, Bulletin of Materials Science, Accepted.

5

Erosive Damages in  Hydro Power Projects in the Himalayan Region and the Role of Metallurgy in providing relevant remedial Measures, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.10

6

Study of Nitronic Steels for Hydro Power Plant Applications, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.1-10 Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.11-16

7

Effect of Heat treatment on Erosion Behaviour of 23-8-N Steel, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.125-29

8

Cavitation and Solid Particle Erosive Behaviour of Hydro Turbine Stainless Steel, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.44-49

9

Role of Nitrogen in Steels for erosion Resistance Applications, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.67-72

10

Erosion Behaviour of 13/4 Martensitic Stainless Steel, Proc. National Seminar on Metallurgical Problems in Power Projects in India, MNIT Jaipur, Feb 22-23, 2013, p.126-131

11

Silt damages in hydroelectric projects in the himalayan region – a challenge to material scientists, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 1-10, BRCM CET, Bahal (Haryana).

12

Prospects of nitronic steel as an substitute to 13/4 steel for hydro power plant, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 11-15, BRCM CET, Bahal (Haryana).

13

Design and indigenous fabrication of dry erosion tester, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 26-33, BRCM CET, Bahal (Haryana).

14

Erosive wear behavior of different grade stainless steels, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 34-40, BRCM CET, Bahal (Haryana).

15

Effect of heat treatment on carbides of as-cast 23-8n nitronic steel for erosion resistance applications, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 41-45, BRCM CET, Bahal (Haryana).

16

Mechanism and application of adsorption inhibitors in hydro power plants, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 255-267, BRCM CET, Bahal (Haryana).

17

Opportunities of entrepreneurship in mechanical engineering, Technical journal of Mechanical Engineering Society (MES), June, 2013, p. 1,  BRCM CET, Bahal (Haryana)

18

A comparative study of cavitation erosion behavior of 23/8N Nitronic steel and 13/4 martensitic stainless steel, Advanced Materials Research ( trans. Tech. Publications), 585, 2012, 554-558 

19

Nitronic steel as erosion resistant material for hydro turbine applications, Presented in National Conference on Allied Trends of Engineering for Development of Technological Aspects, March 2, 2012, Dhamangaon (Rly)

20

Combating erosion in hydro turbine applications, Proceedings of International Conference on Advancements in Engineering & Technology (ICAET-2012) October12-13, 2012 Sangrur, Punjab, India, 47-51

G.P. Yadav

Sr. No.

Description

1

Solid waste a concern of metro cities, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, BRCM-CET, Bahal, Haryana, pp. 337-340.

2

Effect of constituents on sedimentation of magneto rheological fluid, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.128-135, BRCM CET, Bahal (Haryana).

3

Study of characteristics of HAZ in MIG welded plain carbon steel plates, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 218-226, BRCM CET, Bahal (Haryana).

A.K. Mishra

Sr. No.

Description

1

Optimization of Tribological Parameters in Al6061/SiC Metal Matrix Composite by Taguchi’s Technique, International Journal of Innovative Technology And Creative Engineering (ISSN: 2045-8711) VOL.2 NO.11 November 2012

2

Tribological Behaviour of Al-6061 / SiC Metal Matrix Composite by Taguchi’s Techniques, International Journal of Scientific and Research Publications, Volume 2, Issue 10, October 2012 ISSN 2250-3153

3

Parameters Optimization For Gas Metal Arc Welding of Mild Steel Using Taguchi’s Technique, International Journal of Innovative Technology And Creative Engineering (ISSN:2045-8711) VOL.3 NO.3 March 2013

4

Wear Behaviour of Al-6061with different Reinforcement & Particle Size of SiC Metal Matrix Composites, European Journal of Scientific Research ISSN 1450-216X / 1450-202X Vol. 98 No 4 March, 2013, pp.542-550

5

Application of Taguchi Technique to optimize Tribological behaviour of Al6061T6/SiC/Al2OMMCs, IJSRP, Vol.3, Issue. 8, ISSN: 2250-3153, 2013

6

Study of dry sliding wear behaviour of Al-6061/SiC/Al2O3/Graphite Hybrid MMCs using Taguchis Technique, IJSRP, Vol.3, Issue. 8, ISSN: 2250-3153, 2013

7

Wear behaviour of Al-6061/SiC/Al2O3/Fly ash Metal Matrix Composite, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.416-422, BRCM CET, Bahal (Haryana).

8

Wear Behaviour of A6061- T6/SiC/Al2O3/Graphite Hybrid Metal Matrix Composite Using Taguchi Technique, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.52-63, BRCM CET, Bahal (Haryana).

Nitesh jain

Sr. No.

Description

1

“A review on behavior of mechanical and metallurgical properties in friction stir welding”, International Journal of Engineering, Applied and Management Sciences Paradigms, Issue 1, April 2019, vol. 54 (1), pp. 369-375, ISSN 2320-6608.

2

Convective heat transfer coefficient for indoor forced convection drying of vermicelli, IOSR Journal of Engineering June. 2012, Vol. 2(6) pp: 1282-1290

3

Effect and Comparison of Open Sun and Indoor Forced Convection on Heat Transfer Coefficients for Drying of Vermicelli, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp.136-144, BRCM CET, Bahal (Haryana).

 4

 “An overview of heating process used in jaggery making”. RTME – Oct 2013, pp 76 – 81, BRCM College of Engineering & Technology, Bahal.

5

“Effect and comparison of open sun and indoor forced convection on heat transfer coefficients for drying of vermicelli”. RTME – Oct 2013, pp 136 – 144, BRCM College of Engineering & Technology, Bahal.

6

“A review paper on different techniques used for drying agriculture products in current scenario”. GJETME – Feb 2014, pp 165 – 173, Gateway Institute of Engineering & Technology, Sonipat.

7

 “Effects of Total Productive Maintenance: A case study with Sandhar Automotive Gurgaon”, Proceeding of national conference on Emerging Trends in Mechanical Engineering (NCTEM-2014), Organized by Gate Way Institute of engineering and Technology, Sonipat.

8

“Analysis of Magneto Rheological fluid”, Proceeding of national conference on Emerging Trends in Mechanical Engineering (NCTEM-2014), Organized by Gate Way Institute of engineering and Technology, Sonipat.

9

“Experimental Study and Comparison of Greenhouse Drying of Vermicelli under Natural Convection and Forced Convection”, SEPMWET-2017, March 18-19,2017, BRCM-CET, Bahal, Haryana, pp 155-158, ISBN: 978-93-84922-36-8.

Mukul Kararia

Sr. No.

Description

43

Synthesis of Magneto Rheological Fluid, International Journal of Engineering and Advanced Technology (IJEAT), 2013.

44

Effect of constituents on sedimentation of magneto rheological fluid, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.128-135, BRCM CET, Bahal (Haryana).

45

Effect of constituents on the off-state properties of magneto rheological fluid, Proceeding of National Conference RTME-2013, October 4-5, 2013, pp.196-202, BRCM CET, Bahal (Haryana).

Kanwarpal

Sr. No.

Description

1

Singh K. P., Kumar A., and Kaushal, D.R. (2019), Experimental investigation on effects of solid concentration, chemical additives, and shear rate on the rheological properties of bottom ash (BA) slurry, International Journal of Coal Preparation and Utilization, Taylor and Francis Publications, In press. (http://dx.doi.org/ 10.1080/ 19392699.2019.1636787) (2018 SCI Impact Factor: 2.02)

2

Singh K. P., Kumar A., and Kaushal, D.R. (2019),Computation modelling for fine particle flow in horizontal slurry pipelines, International Journal of Research and reviews: Journal of Physics ISSN: 2278-2265 (Online), ISSN: 2347-9973 (Print) volume 8(1)  pp 1-6.(UGC approved).

3

Singh K. P.,(2018) CFD modelling of silica sand slurry flow through straight pipelines and bends using FLUENT, International journal of computation engineering research, ISSN (e): 2250 – 3005,Volume 8(5) pp 47-51 (UGC Approved) Impact Factor : 6.41

4

Singh K. P., (2018) Performance analysis of centrifugal pump used in slurry pipeline transportation by CFD modelling in ANSYS 15, International Journal of Enhanced Research in Management & Computer Applications, Volume 7(2) pp. 437-442

5

Singh K. P., (2018) Nanotechnology and Nano-materials: an advance developing approach for Indian Industries. International Journal of All Research Education and Scientific Methods (IJARESM) ISSN: 2455-6211, Volume 6, Issue 4, April- 2018, Impact Factor: 2.287

6

Singh K. P., N Sura,(2018) Experimental Study on Effects of Process Parameters on HAZ of Plain Carbon Steel Using GMAW, in International Journal of Latest Research in Science and Technology,Volume 2(4) pp 167-170(ISSN 2394 – 3386)

7

Arvind Kumar, Singh K. P., Bhupender Singh”CFD modeling for Silica sand slurry in horizontal pipeline system” YMCAUST International journal of research,july 2015 vol3(2)ISSN:2319-9377

8

Singh K. P., Singh R, Phogat S., (2017)  “Effect of addition of Fe-Si on mechanical and metallurgical behavior of Al Powder Metallurgy (PM) product” International Journal of Material Sciences (ISSN No. 0973 - 4589)  pp. 67-72

9

Singh K. P., Singh R., Phogat S(2017)  “Experimental Analysis of Surface Roughness and Machinability parameters of Al base Alloys with material additives(Fe-Si)”  International Journal of Material Sciences  (ISSN No. 0973 - 4589) pp. 57-65

10

Simulated Study of Feasibility and Design of 10 KWp STV, Proceedings of 2ndInternational Conference on ESTEEM-2013, March 3-4, 2013, PPIMT Hisar (Haryana).

11

An Analysis of Sintering Mechanism, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, pp. 272-275, BRCM-CET, Bahal, Haryana.

12

Powder Metallurgy (PM) of Aluminium Alloy, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, pp 208-211, BRCM-CET, Bahal, Haryana.

13

Cogeneration of Energy, Proceedings of National Conference on Industrial Electronics, Drives and Embedded Systems, March 7-8, 2009, BRCM CET Bahal, Haryana

14

Sintering Technology: An Analytical Overview, Proceedings of NCTI, October 11-12, 2008, pp 418-423, BRCM CET Bahal, Haryana.

15

Mechanical behaviour of aluminium (Al-Fe-Si) based alloys using powder metallurgy (PM) technique Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 118-123, BRCM CET, Bahal (Haryana).

16

Study of characteristics of HAZ in MIG welded plain carbon steel plates, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp. 218-226, BRCM CET, Bahal (Haryana).

17

CFD modelling of particulate flow (2-phase flow) in pipe lines using fluent software, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp.386-397 BRCM CET, Bahal (Haryana).

18

An Analysis of Surface Roughness and Machinability of Al-Fe-Si Alloys, Proceedings of National Conference TAME-2012, October 19-20, 2012, YMCAUST, Faridabad (Haryana).

Ankit Kumar

Sr. No.

Description

1

Techniques of Erosion Testing, Mechanica (BRCM CET), June, 2014.

2

Steels for Erosion Resistant Applications, Students conference on Engineering and system, SCES-2014, May 28 -30, 2014, MNNIT, Allahabad.

3

Design and indigenous fabrication of dry erosion tester, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp.26-33 BRCM CET, Bahal (Haryana).

Mukesh Kiroriwal

Sr. No.

Description

1

Application of Taguchi method for optimizing CNC milling machine process parameters, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 245-254.

Nishant

Sr. No.

Description

1

Design, fabrication and experimental analysis of a single slope solar still, Proceedings of National Conference RTME-2013, October 4-5, 2013, pp.235-244, BRCM CET, Bahal (Haryana).

Suresh Kumar

Sr. No.

Description

1

An Overview of Optimization Techniques Used in Solar Drying, Asian Journal of Science and Applied Technology (AJSAT) Vol1.No.1 2013 pp 5-11.

2

Experimental methods for measuring local deformation, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, BRCM-CET, Bahal, Haryana, pp. 304-309.

3

An overview of heating process used in Jaggery making, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 76-81.

4

Application of Taguchi method for optimizing CNC milling machine process parameters, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 245-254.

Sunil

Sr. No.

Description

1

“Comparative Performance Assessment of a Hybrid Solar-Coal Power Plant”, Process Integration and Optimization for Sustainability (Springer), (2018), 1-9, DOI10.1007/s41660-018-0066-x. Online ISSN:2509-4246, Print ISSN:2509-4238.

2

“Enhancement of Assembly Line Efficiency with Optimization of Productivity”, in the International Journal of Engineering Sciences and Research Technology (IJESRT), Vol. 7(7), pp. 260-269, 2018, ISSN: 2277-9655. DOI: 10.5281/zenodo.1320902.

3

Experimental investigation of the performance of an indirect mode natural convection solar dryer for drying Fenugreek Leaves, Journal of thermal analysis & calorimetry (Springer), 2014 (Communicated).

4

Construction and performance analysis of an indirect solar dryer integrated with solar air heater, Procedia Engineering (Elsevier) 38 (2012), pp. 3260 – 3269.

5

Modelling the Drying Kinetics of Green Peas in a Solar Dryer and Under Open Sun, IJEE, Vol. 4, Issue 4, 2013, pp. 663-676.

6

An Overview of Optimization Techniques Used in Solar Drying, Asian Journal of Science and Applied Technology (AJSAT)Vol1.No.1 2013 pp 5-11.

7

Optimization of thermal performance of a flat plate solar air heater using constrained non linear optimization technique, Proceedings of 4th International Congress of Environmental Research, December 15-17, 2011, SVNIT Surat, Gujarat.

8

Construction and performance analysis of an indirect solar dryer integrated with solar air heater, International Conference on Modeling Optimization and Computing (ICMOC-2012), April 10-11, 2012 at Kumarakoil (Tamil Nadu).

9

Solid waste a concern of metro cities, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, BRCM-CET, Bahal, Haryana, pp. 337-340.

10

An overview of heating process used in Jaggery making, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp.76-81.

11

Syngas Produced In Biomass Gasification System- A Practical Approach, First National Conference on Advances in Mechanical Engineering (NCAME-2011), 20th - 21st May 2011, UIET, Panjab University, Chandigarh, pp. 19-22.

12

CFD modelling of particulate flow (2-phase flow) in pipelines using fluent software, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 386-397.

13

Applications of Nano-materials and Nanotechnology in Construction Industry- A Review, Proceedings of National Conference on Recent Trends and Innovation in Civil Engineering, November 15-16, 2013, BRCM-CET, Bahal, Haryana, pp. 48-52.

14

Career prospects for Mechanical engineers, Technical journal of Mechanical Engineering Society (MES), June, 2013, p. 5,  BRCM CET, Bahal (Haryana)

Ravinder Kumar

1

Effect of solidification on microstructure and mechanical properties of aluminium – silicon alloys, International Journal for scientific research & development (IJSRD), ISSN: 2321-0613, Issue 10, Vol. 4, December 2016, pp. 493-496. (Impact factor 4.396)

 

Naresh kumar

Sr. No.

Description

1

Improving quality in engineering institutions- Six Sigma demystified, Proceedings of International Conference on Manufacturing Excellence (MANFEX), March 29-30, 2012, Amity University Greater Noida, U.P. India.

2

Six-Sigma in Engineering Institutions, Proceedings of National Conference NEIET-2012, April 28, 2012, BITS, Bhiwani (Haryana).

3

Does quality management need for today, International Journal on Emerging Technology, 4(1), 2012, pp. 75-80.

4

Graph Theoretic Analysis of advanced combined cycle power alternatives with latest gas turbines, GT India 2013, paper no. 3760.

5

Exegetic analysis combined cycle power with single steam extraction, GT India 2013, paper no. 3740.

6

Supply Chain Management (SCM) by AHP Method, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 329-336.

Mahender Singh Kaswan

Sr. No.

Description

1

Ordering policy selection criterion and methods, Proceedings of National Conference on Recent Trends in Mechanical Engineering, March 21-22, 2013, MET’s Institute of Engineering Bhujbal Knowledge City, Nashik-422003, pp. 149-152.

2

Just in time approach of waste reduction in health care sector: A critical Literature review, 3rd International Conference on Production and Industrial Engineering CPIE-2013, NIT Jalandhar.

3

Elements of JIT in Health Care Services, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp.320-328.

4

Elements of JIT in Health Care Sector with Research guidelines, IUP Journal of Supply Chain Management, 2013.

Vinod Kumar

Sr. No.

Description

1

Computerized Maintenance Management Information System: A Critical Literature Review, Proceedings of National Conference on Recent Trends in Mechanical Engineering, March 21-22, 2013, MET’s Institute of Engineering Bhujbal Knowledge City, Nashik-422003, pp. 149-152.

2

A Proposed framework of Computerized Maintenance Management Information System for JCB India Limited Ballabgarh, IUP Journal of Mechanical Engineering, Vol. IV.,2013.

3

Development of Computerized Maintenance Management Information System for JCB India Limited Ballabgarh, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 398-408.

Vishwas Yadav

Sr. No.

Description

1

 “Framework of Integrated Green Lean Six-Sigma and Identified Barriers for Green Lean Implementation in manufacturing Industry: A Critical Literature Review” in “International Journal of  Engineering, Applied and Management Sciences Paradigms ( A UGC Approved Journal), Vol 54, Issue 1, April 2019, ISSN 2320-6608

2

 “Analysis of TPM implementation in auto sector- A Case Study” in “International Journal of  Engineering Research and Management Technology, Vol 3, Issue 4, July 2016,ISSN 2348-4039

3

 “Total Productive Maintenance: A case study to measure and improve effectiveness of performance measures of tube mill industry ” in “International Journal for scientific research and development , Vol 4, Issue 06,2016/ISSN (online):2321-0613

4

“Some Total Productive Maintenance (TPM) Practices in Auto-Sector- A Case Study” in “International Journal of R&D in Engineering Science and Management, Vol 2, Issue 5, July 2015, p.p.340-351,ISSN 2393-865X

5

Applying Total Productive Maintenance in Auto Sector: A Case Study with Sandhar Group Gurgaon, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 409-415.

6

“Management of Supply Chain in Agro Food Sector- A Case Study”, Proceedings of 4th International Conference on Production and Industrial Engineering (CPIE-2016) , 19-21 December, 2016, NIT Jalandhar with ISBN : 978-93-5267-403-9

7

”Scheduling of Outpatients in Health care Industries , Proceeding of national conference on Sustainable Engineering Practices in Materials, Water and Energy Technologies (SEPMWET-2017) , March 18-19,2017, BRCM-CET, Bahal, Haryana, PP.155-158 with ISBN: 978-93-84922-36-8

8

”Experimental Study and Comparison of Greenhouse Drying of Vermicelli under Natural Convection and Forced Convection   , Proceeding of national conference on Sustainable Engineering Practices in Materials, Water and Energy Technologies (SEPMWET-2017), March 18-19,2017, BRCM-CET, Bahal, Haryana, PP.155-158 with ISBN: 978-93-84922-36-8

9

”Effects of  Total Productive Maintenance : A case study with Sandhar Automotive  Gurgaon, Proceeding of national conference on Emerging Trends in Mechanical Engineering (NCTEM-2014), Organized by Gate Way Institute of engineering and Technology, Sonepat.

10

”Different techniques used for  drying agriculture products in current scenario, Proceeding of national conference on Emerging Trends in Mechanical Engineering (NCTEM-2014), Organized by Gate Way Institute of engineering and Technology, Sonepat.

Ajay Mahendru

Sr. No.

Description

1

Performance analysis of  solar parabolic trough collector for domestic hot water generation using Aluminium as reflective material, Proceedings of national conference on Research Methodology & advancement in engineering and science , April 2013,  Shanti Niketan College of engg.,  Hisar.

Sandeep Chauhan

Sr. No.

Description

1

Sandeep Chauhan, V. Verma, Ujjwal Prakash, P.C. Tewari  and Dinesh Khanduja (2016), “Analysis of Powder Metallurgy Process Parameters for Mechanical Properties of Sintered Fe-Cr-Mo Alloy Steel”, Materials and Manufacturing Processes, Taylor and Francis, Vol. 32, Issue 5, pp. 537-541, Impact factor = 2.669,Print ISSN: 1042-6914Online ISSN: 1532-2475http://dx.doi.org/10.1080/10426914.2016.1221083. (SCI).

2

SandeepChauhan, V. Verma, UjjwalPrakash, P.C. Tewari  and Dinesh Khanduja (2017), “Studies on induction hardening of powder-metallurgy-processed Fe–Cr/Mo alloys”, International Journal of Minerals, Metallurgy and Materials, Springer Publication, Vol. 24, Issue 8, pp. 918–925 , Impact factor = 1.261, DOI: 10.1007/s12613-017-1478-2 (SCI).

3

SandeepChauhan, V. Verma, UjjwalPrakash, P.C. Tewari  and Dinesh Khanduja (2018), “Influence of Sintering Temperature and Cooling Rate on Microstructure and Mechanical Properties of Pre-Alloyed Fe-Cr-Mo Powder Metallurgy Steel”, Transaction of Indian Institute of Metals, Springer Publication, Vol. 71, Issue 1, pp. 219-224, Impact factor = 0.91, DOI 10.1007/s12666-017-1157-z(SCI).

4

SandeepChauhan, V. Verma, UjjwalPrakash, P.C. Tewari and Dinesh Khanduja (2016). Paper entitled, “Processing of Cr-Mo Alloy Steel via PM Route”, Elsevier- Materials Today Proceedings, http://dx.doi.org/10.1016/j.matpr.2016.09.001, ISSN: 2214-7853 (SCOPUS).

5

Conceptual Analysis of Heat Treatment Aspects for Low Carbon Alloy Steel by Using Powder Metallurgy Technique, The proceedings of the International Conference on Emerging Material Technology ICEMT 2013 April 8-10, 2013, Jabalpur, Madhya Pradesh, India.

6

Effect on Mechanical and Metallurgical Properties by adding Alloying Elements in Iron by using Powder Metallurgy Technique: A Critical Literature Review, The proceedings of the International Conference organized by Ganpati Institute of Technology and Management, Bilaspur, Yamuna Nagar, Haryana.

7

Hardness and Case Depth Optimization Strategy for Induction Hardening Process in Powder Metallurgy by using TOPSIS, Proceedings of National Conference on Recent Trends in Materials Engineering, October 4-5, 2013, BRCM-CET, Bahal, Haryana, pp. 363-370.

8

Framework for Induction Hardening Parameters Optimization of Sintered Iron Alloy by using Intelligent Techniques, 4th International Conference on Emerging Trends in Engineering & Technology, October 25th -27th, 2013, Geeta Institute of Management & Technology, Kurukshetra, INDIA-136131.

Akhilesh Kumar Singh

Sr. No.

Description

1

Non conventional energy sources [Hybrid system(wind-solar)] for lighting applications, Proceedings of National Conference on Recent Developments  in Mechanical  Engineering, Feb. 19-20,2010, pp.150-153, BRCM-CET, Bahal, Haryana.

2

Packaging and dimensioning technology, Proceedings of National Conference on Recent Developments  in Mechanical  Engineering, Feb. 19-20,2010, pp.232-237, BRCM-CET, Bahal, Haryana.

Sanjay Jangra

Sr. No.

Description

1

A comparative performance analysis of a solar parabolic trough collector for domestic hot water generation , Proceedings of national conference on Research Methodology & advancement in engineering and science , April 2013,  Shanti Niketan College of engg.,  Hisar.

Dr. Vijay Mittal

Sr. No.

Description

1

Energy & Environment – A Case Study , Proceedings of National Conference on Recent Developments  in Mechanical  Engineering, Feb. 19-20,2010, pp.321-325, BRCM-CET, Bahal, Haryana.

2

Performance Evaluation of Solar Air Heater having dimple shape as artificial roughness on absorber plate , Proceedings of National Conference on Recent Developments  in Mechanical  Engineering, Feb. 19-20,2010, pp. 265-268, BRCM-CET, Bahal, Haryana.

3

Experimental investigation on Desiccent Air- conditioning system in India, Frontiers of Energy & Power, Nov. 2010, Springer, China.

Dr. Zahir Hassan

Sr. No.

Description

1

A Comparative study of wear kinetics in Al-Si piston alloy & Al-SiC particulate composite, International conference on powder metallurgy for automotive & engineering industries cost effective solution, PM-11, Feb 3-5, 2011, Pune.

B.N. Pathak

Sr. No.

Description

1

Mechanical behavior of Al-(4-5)-Fe-1V-1Si  Alloys , Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, pp.1-3, BRCM-CET, Bahal, Haryana

2

An Analysis of Sintering Mechanism, Proceedings of National Conference on Recent Developments in Mechanical Engineering, February 19-20, 2010, pp. 272-275, BRCM-CET, Bahal, Haryana.